Discontinued Products
MicroMIX
  • Overview
  • Specs
Microphone Preamp w/ Phantom Power

Sometimes you need to connect a low-impedance or condenser microphone to something which does not support it, such as a high-impedance mixer input, a PC sound card, a powered speaker or possibly an instrument amp. Situations like this call for a mic preamp like the MicroMIX to act as an interface. Simplicity and economy are important factors. A level control and a simple overload indicator such as a Clip LED will also help you to keep the signal clean.

Please click here for a .pdf version of the spec sheet.

Input Gain 50dB (XLR), 44dB (1/4in)
Gain/Frequency Band 10K Ohms (balanced and unbalanced)
Input Impedance <0.01%
IMD (SMPTE) 0dBV balanced (XLR), +10dBV unbalanced (1/4in)
Maximum Output Power Bal./low-imped. XLR, Unbal. 1/4 in Line Input
Input Connectors Bal. XLR line, Unbalanced 1/4 in Line/Headphone
Output Connectors 12V DC (Adapter included)
Total Harmonic Distortion <0.01%
Frequency Response <10 degrees 20Hz - 20kHz
Clip Headroom +36 volt, (for the XLR input)
Adapter Power and Clip LEDs
Dimensions 4.5x2.875x1.5 inch (150mm x 75mm x 38mm)
Weight 1.2 lbs (544g)
This is beta software, use at your own risk!
MicroMIX - Microphone Preamp w/ Phantom Power