C2
Large-Diagphragm Condenser Microphone
The C2 is an upgraded version of our C1 microphone. Like the C1, its a large-diaphragm condenser mic with a wide frequency response and cardioid pickup pattern.
It adds a switchable input pad and high-pass filter for additional flexibility. The input pad offers settings for 0, -6, and -12 dB so it can be used on loud sources without clipping. The high-pass filter can be set to 100 Hz or 200 Hz to reduce rumble and boominess, or bypassed to preserve low frequencies.
The C2 is protected by a precision-tooled body and dent-resistant stainless steel mesh windscreen, and comes with a shockmount and carrying case.
Looking for a mic with variable pickup patterns? Check out the C3.
Features
- Exceptionally Warm Sounding FET Design
- Smooth Frequency Response
- Two Position Pad & Two Position High Pass Filter Switches
- 34mm Gold Sputtered Diaphragm Wide
- Dynamic Range with Low Noise Floor
- Secure Cradle Mount and Hard Case Included
Specifications
| Type | Cardioid Condenser Microphone |
| Polar Pattern | Cardioid |
| Frequency Response | 20 Hz to 20 kHz |
| Max SPL | 132 dB |
| S/N Ratio | 78 dB |
| Noise | 16 dB A |
| Impedance | <150 Ω |
| Recommended Load Impedance | 1000 Ω |
| Capsule | 34mm Diaphragm Side Address |
| Power Requirement | 48 V Phantom Power |
| Dimensions | 2.2″ x 6.6″ (5.7 cm x 16.85 cm) |
Specifications subject to change without notice
The C2 is an upgraded version of our C1 microphone. Like the C1, its a large-diaphragm condenser mic with a wide frequency response and cardioid pickup pattern.
It adds a switchable input pad and high-pass filter for additional flexibility. The input pad offers settings for 0, -6, and -12 dB so it can be used on loud sources without clipping. The high-pass filter can be set to 100 Hz or 200 Hz to reduce rumble and boominess, or bypassed to preserve low frequencies.
The C2 is protected by a precision-tooled body and dent-resistant stainless steel mesh windscreen, and comes with a shockmount and carrying case.
Looking for a mic with variable pickup patterns? Check out the C3.
Features
- Exceptionally Warm Sounding FET Design
- Smooth Frequency Response
- Two Position Pad & Two Position High Pass Filter Switches
- 34mm Gold Sputtered Diaphragm Wide
- Dynamic Range with Low Noise Floor
- Secure Cradle Mount and Hard Case Included
Specifications
| Type | Cardioid Condenser Microphone |
| Polar Pattern | Cardioid |
| Frequency Response | 20 Hz to 20 kHz |
| Max SPL | 132 dB |
| S/N Ratio | 78 dB |
| Noise | 16 dB A |
| Impedance | <150 Ω |
| Recommended Load Impedance | 1000 Ω |
| Capsule | 34mm Diaphragm Side Address |
| Power Requirement | 48 V Phantom Power |
| Dimensions | 2.2″ x 6.6″ (5.7 cm x 16.85 cm) |
Specifications subject to change without notice