Sometimes you need to connect a low-impedance or condenser microphone to something which does not support it, such as a high-impedance mixer input, a PC sound card, a powered speaker or possibly an instrument amp. Situations like this call for a mic preamp like the MicroMIX to act as an interface. Simplicity and economy are important factors. A level control and a simple overload indicator such as a Clip LED will also help you to keep the signal clean.
| Input Gain | 50dB (XLR), 44dB (1/4in) |
| Gain/Frequency Band | 10K Ω (balanced and unbalanced) |
| Input Impedance | <0.01% |
| IMD (SMPTE) | 0dBV balanced (XLR), +10dBV unbalanced (1/4in) |
| Maximum Output Power | Bal./low-imped. XLR, Unbal. 1/4 in Line Input |
| Input Connectors | Bal. XLR line, Unbalanced 1/4 in Line/Headphone |
| Output Connectors | 12V DC (Adapter included) |
| Total Harmonic Distortion | <0.01% |
| Frequency Response | <10 degrees 20Hz – 20kHz |
| Clip Headroom | +36 volt, (for the XLR input) |
| Adapter | Power and Clip LEDs |
| Dimensions | 4.5×2.875×1.5 inch (150mm x 75mm x 38mm) |
| Weight | 1.2 lbs (544g) |
